ROLYPULLEY / WEBWINDER

RolyPulley

RolyPulley Webbing Management

RolyPulley WEBWINDER | Dual 1-Inch Strap Winder

$119.00 RELEASED

SKU: EXO-HDW-RP-WEBWINDER-200-SS-R01

Capacity is a geometry estimate using 0.070-inch webbing and remains subject to physical winding validation. Webbing is not included.

01 / LOAD THE MIDPOINTS

Two straps. Two lanes.

Place each 1-inch strap at its midpoint in a separate WebCotter lane so both free halves remain available.

02 / ROUTE THE TAILS

One stacked pair through each slot.

Each strap's two halves share one top slot; the two straps sit side by side inside the deep winding channel.

03 / WIND FOUR TAILS

Collect twice as fast.

Turn the supported split pin with the included compact 5/32-inch L-key to wind all four loose tails together.

04 / STORE, DON'T TENSION

Keep loose webbing managed.

WEBWINDER is a storage device for unloaded straps—not a ratchet, anchor, tensioner, or load-bearing tie-down component.

TWO STRAPS / FOUR TAILS

A deep stainless reel for the webbing left after the work is done.

Collect two long 1-inch straps at once with a deep, all-stainless WEBWINDER. Midpoint-load one strap in each lane of the supported WebCotter split pin, stack each strap’s two free halves through its top slot, and wind all four loose tails together.

Includes the stainless WEBWINDER body, supported WebCotter winding pin, and compact 5/32-inch L-key. Safe target capacity is approximately 40 feet combined—about 20 feet per strap—using 0.070-inch webbing. Capacity remains subject to physical winding validation.

Storage use only: WEBWINDER is not a ratchet, tensioner, anchor, or load-bearing tie-down component. Webbing is not included.

WEBWINDER / TWO STRAPS / FOUR TAILS

Find both midpoints.
Wind every tail.

WEBWINDER keeps long, loose webbing together without turning the storage device into part of the loaded tie-down system.

01

Load the middle.

Place the midpoint of one 1-inch strap in each lane of the supported WebCotter split pin.

02

Route the tails.

Stack each strap's two free halves through its top slot. The two straps remain side by side inside the deep channel.

03

Turn and collect.

Use the included compact 5/32-inch L-key—or another compatible hex key—to wind all four tails at once.

WEBBING FORMAT2 × 1 in straps

SAFE TARGET CAPACITY≈ 40 ft combined

REFERENCE THICKNESS0.070 in webbing

IN THE BOXWinder + WebCotter + key

Capacity is a geometry estimate—approximately 20 feet per strap—and remains subject to physical winding validation. WEBWINDER stores loose webbing; it is not a ratchet, tensioner, anchor, or load-bearing tie-down component. Webbing is not included.

RELATED / CONNECTED Pulleys, straps, and hardware